2002Stock.jpg (43026 bytes)

 

 

Site Links:
Home
Site News
Guru's Prior Blog's
VMax Files
Links
Submitted Bikes

Gen 1 120(+) RWHP Club

Gen 2 200(+) RWHP Club

Jay Gleason
   

 

 

 

Roy Tanck's Flickr Widget requires Flash Player 9 or better.

Get this and other widgets at roytanck.com

 

Site Hits

Hit Counter

 
This site was created and maintained by:
Tim Nash

Disclaimer

Copyright 2010
V-MaxSite.com
VMaxGuru.com
theVMaxGuru.com
All rights reserved.

 

 

Jumbo LED 

Turn Signal Indicator

The day someone tells you that you left your blinker on, you'll want this one!

5/28/09 So, have you been riding on the 09 V-Max and realized that you have had your idiot indicator on for the last 20 miles? I have. You see, there is a time limit where the turn signal becomes an inattentive idiot indicator. Even worse, someone catches me at a red light and tells me it's on! So, I set out to build a turn signal cancellation device as part of the top speed fix. Well, its a mechanical function of the switch and would be a little hard to fix. So, the next best thing, make the tiny stock indicator larger. Here is the beginnings of that project.

Turning the center stock:

 

Drilling the center stock:

 

Parting to the right length:

 

Pieces:

 

10mm Jumbo LED and some of the parts:

 

Electronics assembled:

 

Temp mock-up install until the proper parts arrive:

This is not anywhere near the finished product. I have some more parts on order. This will be a simple 2 wire quick tap plus ground installation. The LED I am using is a 1 watt. It will give you a tan.

5/30/09 Video of the completed Jumbo LED Blinker. I had to drop the voltage to 2 volts to turn down the brightness otherwise it would blind you at night. VERY bright. I think I will see if I can put one of these in my shift light!